- How To Mount A Dmg For Raspberry Pi System
- How To Mount A Dmg For Raspberry Pi Beta
- How To Mount A Dmg For Raspberry Pi Emulator
Have you ever had your Raspberry Pi stopped booting up? The red and the yellow lights flash a few times and then quit? These are classic symptoms of a corrupted SD Card.
Raspberry Piのユーザーのパスワードも聞かれるので、入力してEnterを押します。 sshfs pi@192.168.2.21:/home/pi /raspberrypi. なお、一度接続した後にRaspberry Piを再インストールすると鍵検証エラーで接続に失敗します。. Mac users can just double-click the DMG file to mount the disk image, then double-click again to launch Etcher. This issue is specific to the Raspberry Pi 3. Fortunately restarting the.
This posting will walk through how to fix a corrupted SD Card for your Raspberry Pi using a Mac and VirtualBox. This is a fairly complicated procedure, but most of it only has to be done once and then you can fix corrupted cards quickly and efficiently.
Why do SD Cards get Corrupted?
When the SD Card is being written, there are windows of vulnerability. There seem to be four main scenarios during which SD Cards become corrupted:
- Powering your Raspberry Pi down without doing a “sudo halt“. Do this enough, you will corrupt your card.
- Poor quality SD Cards. Fake SanDisk cards especially.
- Marginal power supplies. Watch the Red LED on newer Raspberry Pi’s. If it is blinking, there are issues. Poor power quality from the mains can also screw up your Raspberry Pi
- Overclocking your Pi. If you push it too far, things start not quite working correctly.
OK, what can I do with a Corrupted SD Card?
The first thing you can do is BEFORE you get corrupted, back up your SD Card on a regular basis. If you spend hours configuring an SD Card, then back it up. Changing your software? Back it up. It will save you a lot of time if you end up corrupting or destroying the SD Card. Here is how to do it on a Mac.
Sometimes, the SD Card is actually damaged. In that case, you aren’t going to be able to fix the card. However, you can get your files off the SD Card in many cases. Check out this posting.
Fixing a Corrupted SD Card
Overall, this is the procedure for fixing a corrupted SD Card using a Mac. The process is similar for a PC, but requires different instructions to install and get VirtualBox working.
- Back up your SD Card, if possible. Here is how to do it on a Mac.
- Install VirtualBox on your Mac
- Install Ubuntu in Virtual Box
- Attach SD Card to Ubuntu
- Run “fsck” to repair the SD Card
Install VirtualBox on your Mac
VirtualBox is a “virtualizer” which means that it allows you to install an operating system in a “Box” inside another operating system. It is open source and free to use. In this case we will be installing Linux (Ubuntu) on a Mac OS X platform.
Step 1: Download the VirtualBox .dmg file for the Mac OS X from this page:
Step 2: Click on the downloaded .dmg file.
How To Mount A Dmg For Raspberry Pi System
Step 3: Double click on the VirtualBox.pkg icon
Step 4: Follow the instructions to install VirtualBox in the applications directory.
Step 5: Now download the installation file (.iso) for Ubuntu from this link: Note: Make sure you use this link – ubuntu-1510-desktop-i386.iso. Civ 5 map editor for mac. If this link isn’t available, go to https://mirror.pnl.gov/releases/ and find the latest release. The default download link on Ubuntu server will download an amd64 image, which WILL NOT WORK on your Mac OS X.
Step 6: Start up VirtualBox from Applications
Step 7: Click on “New”
Step 8: Enter “Ubuntu” as the name. Linux and 64 bit will be automatically selected. Click Continue.
Step 9: Click on continue until you are done, using all the defaults.
Step 10: Click on settings and then on Storage and then on Controller: SATA
Step 11: Enter 2 in port count! This is an important step not to miss! Click “OK” to close
Step 12: Ready to install Ubuntu now! Click the Start Button
Step 13: When you are promoted to select an image, select the ubuntu .iso image downloaded in Step 5.
Step 14: Select “Install Ubuntu” from the screen, then “Continue” from the next screen and then keeping the defaults, finally “Install Now”.
Step 15: Click “Continue” when asked to erase the virtual disk. Don’t worry, this is not your Mac OS X disk.
Step 16: Select your Timezone. Hit “Continue”
Step 17: Put in your name and choose a password. Make sure you can remember it! Now hit “Continue” and you are installing Ubuntu.
Step 18: Now click “Restart Now” when the installation is finished. If Ubuntu does not start (which happens often the first time), then hit the “x” in the corner and select “Power Off the Machine”.
Step 19: Now you have your Ubuntu Virtual Machine running. Click the “X’ on the window and select “Send the shutdown signal”. Then click “Shutdown”
Adding the SD Card to your Ubuntu Virtual Machine
In order to mount and fix your corrupted SD Card, you need to add it to the Ubuntu virtual machine. This is the complicated part of this procedure.
Step 1: Insert your SD Card into the reader on your Mac OS X machine. Below is on the Mac Mini. On a Mac Book, it will be on the side.
Step 2: Open up a terminal window and type:
Step 3: You will see a list similar to this. Look for your SD card and note the /dev path (/dev/disk4 in this case)
Step 4: In the terminal window type (replacing /dev/diskX with what you found in Step 3):
Step 5: change directory in the terminal window to the “VirtualBox VMs” on our development machine this command is:
Note the quotes around the directory name. Adding spaces in directory names and filenames causes all sorts of issues. The user on our machine is “development”. The user name on your machine will be different.
Step 6: Now we come to the magic. Type the following (replacing diskX with what you found in Step 3):
Step 7: Now we have an .vmdk file pointing to your raw SD Card device. We next have to set the permissions on this file so your Ubuntu VirtualBox machine can read the file.
Step 8: Next we have to add the SD Card (a SATA device) in the Ubuntu virtual machine storage configuration built in the previous section.
Step 9: Click on Settings in VirtualBox and select Storage. If port count is “1” change it to “2”
Step 10: Click on the icon on the right of the Controller: SATA disk and select “Choose existing disk”. Select the .vmdk file built in Step 6 above. If it reports that it is busy (Mac OS X likes to remount things for some reason), repeat Step 4 and quickly do Step 10 again.
Step 11: Click OK
Step 12: Start your Ubuntu Virtual machine with the start button.
Now finally, we can repair the SD Card.
Repairing the SD Card
How To Mount A Dmg For Raspberry Pi Beta
Step 1: Select the top most icon on the Ubuntu Desktop. Type “Terminal” in the search line.
Step 2: Select the Terminal Icon on the top line. You will get a terminal window.
Step 3: type
into the terminal window (you may have to enter your password from Step 17 in the section above)
Step 4: Note the name “/dev/sdb”. That is your SD Card on the Ubuntu system. Note it may be different, but if you followed these directions, it should be the same.
Step 5: Now the magic. Finally. We will fix the sdb2 partition on sdb. That is the linux system. Type the following in the terminal window:
Fox shock manual. Downloadhelper for chrome. This may take a while, depending on the speed of your machine. Note that the following picture shows you what you get on a clean, good SD Card. If you have issues, it will show you what it is doing.
Conclusion
Now you should have a repaired Raspberry Pi SD Card. If it doesn’t work, you may have bigger issues. Start by looking at more “fsck repair” pages on the web. If the card is bad, look at mounting the SD Card under your Ubuntu Virtual machine and going into the file system to try to recover your most important files.
How To Mount A Dmg For Raspberry Pi Emulator
The next time you need to repair an SD Card, you should only have to plug it into your Mac OS X and then start Ubuntu from VirtualBox. Note that the image you built for the SD Card repair probably won’t boot without an SD Card plugged in. If you want to use Ubuntu without the SD Card, build another image in VirtualBox. You don’t have to delete the SD Card Ubuntu image.